FBG WDM ITU Filter 100/200GHz Wavelength Division Multiplexing Fiber Bragg Grating

FBGs with narrow spectral bandwidth are excellent components for filtering optical signals. This type of FBG is widely used as an optical add/drop multiplexer in WDM systems. Allow high-level SLSR to avoid adjacent channel crosstalk in the system. The flat top reflection spectrum and steep spectral drop are characteristics of these FBGs. Stable operation requires non thermal encapsulated FBGs with wavelength stability<0.16 nm within the temperature range of 0-70 ⁰ C

MEMS 1x32 Optical Switch (Module Package)

Idealphotonics' MEMS 1x32 optical switch is an optical switch based on MEMS (micro-electromechanical system) technology that allows channel selection between a single input light and 32 output lights. It has the characteristics of small size, long life and stable reliability, and is widely used in optical network fields such as OADM and OXC.

FBG Fabry-Perot interferometer fiber Bragg grating 600-2300nm

Fiber Bragg Grating is currently one of the hotspots in the field of fiber optic sensing research. For many applications that require measuring very small temperature or strain changes, using fiber Bragg gratings can improve acoustic sensitivity. The fiber Fabry Perot interferometer is such a pair of fiber Bragg gratings. In this case, a small phase shift can be detected. By coating the optical fibers between gratings with electrical, magnetic, or acoustic enhancement coatings, small changes in these fields can be measured. For sensing purposes and evaluating small vibrations or acoustic signals through interferometry, using low precision is usually sufficient. Transmission spectra of Fabry Perot cavity. The Fabry Perot fiber interferometer is shown in the figure.

600-1750nm InGaAs quadrant photodiode

The 4346 series is a product line with high sensitivity and high reliability, making it ideal for optical communication equipment. This model is also available with custom packaging options.

532nm polarization-maintaining fiber attenuator

Based on our unique optical design and processing capabilities, our VOA has the characteristics of fast adjustment of optical attenuation, small size, low insertion loss, low polarization-related loss, high mode-related stability and high reliability. It is mainly used in multimode transmission networks, power balancing, product testing, and related instruments and equipment.

InGaAs Photonic Balanced Detector MBD-A Series 300MHz

The high-speed low-noise photonic balanced detector module integrates two matched low-noise analog PIN detectors, a low-noise broadband transimpedance amplifier, and an ultra-low-noise power supply. It features high gain, high sensitivity, high bandwidth, low noise, and a high common-mode rejection ratio (CMRR), effectively reducing common-mode noise in the signal and improving the system's signal-to-noise ratio (SNR).

980-1064nm Polarization-Maintaining Taper Wavelength Division Multiplexer FC/APC

Idealphotonics' tapered wavelength division multiplexing products for optical communications have the advantages of low loss, low polarization-dependent loss, wide operating band and operating temperature range, and no glue in the optical path. This series of products can be used in wavelength division multiplexing systems, fiber optic sensing systems, and fiber optic optical detection equipment.

Ultra long distance collimating lens 525nm (5KM focal length 400mm FC/PC)

The optical fiber output is collimated and reshaped into a large spot, suitable for high-power, long-distance transmission, and pulsed output lasers. Within the operating range, the light exhibits excellent collimation, with a uniform energy distribution and sharp, clear edges. The design adopts a multi-lens series with air gaps, compatible with single-mode, multi-mode, and large-core optical fibers, enabling functions such as remote sensing, illumination, and interference.

980-1030nm Single-Mode Taper Wavelength Division Multiplexer FC/APC

Idealphotonics' tapered wavelength division multiplexing products for optical communications have the advantages of low loss, low polarization-dependent loss, wide operating band and operating temperature range, and no glue in the optical path. This series of products can be used in wavelength division multiplexing systems, fiber optic sensing systems, and fiber optic optical detection equipment.

Ultra-long distance collimating lens 525nm (3KM focal length 320mm SMA905)

The optical fiber output is collimated and reshaped into a large spot, suitable for high-power, long-distance transmission, and pulsed output lasers. Within the operating range, the light exhibits excellent collimation, with a uniform energy distribution and sharp, clear edges. The design adopts a multi-lens series with air gaps, compatible with single-mode, multi-mode, and large-core optical fibers, enabling functions such as remote sensing, illumination, and interference.

Ultra long distance collimating lens 525nm (3KM focal length 320mm FC/PC)

The optical fiber output is collimated and reshaped into a large spot, suitable for high-power, long-distance transmission, and pulsed output lasers. Within the operating range, the light exhibits excellent collimation, with a uniform energy distribution and sharp, clear edges. The design adopts a multi-lens series with air gaps, compatible with single-mode, multi-mode, and large-core optical fibers, enabling functions such as remote sensing, illumination, and interference.

Ultra long distance collimating lens 525nm (3KM focal length 320mm FC/APC)

The optical fiber output is collimated and reshaped into a large spot, suitable for high-power, long-distance transmission, and pulsed output lasers. Within the operating range, the light exhibits excellent collimation, with a uniform energy distribution and sharp, clear edges. The design adopts a multi-lens series with air gaps, compatible with single-mode, multi-mode, and large-core optical fibers, enabling functions such as remote sensing, illumination, and interference.