C-band gain flat erbium-doped fiber amplifier

C++band gain flat erbium-doped fiber amplifier

The C++band gain flat erbium-doped fiber amplifier is a fiber amplifier product specifically designed for fiber optic communication systems. It can simultaneously amplify multiple wavelength signals within the C++band, covering the wavelength range of 1524-1572nm (frequency 190.65-196.675THz), while maintaining consistent gain between wavelengths with a gain flatness of ≤ 1.5 dB. It has the advantages of ultra wide spectrum, high gain, low noise, and flat gain.

C-Band Gain-Flattened Erbium-Doped Fiber Amplifier

Pulsed EDFA Erbium doped Fiber Amplifier Module 1550nm 20KHz

Pulsed EDFA erbium-doped fiber amplifier module 1550nm, repetition rate; 20KHz, pulse width 200ns

C+L band erbium-doped fiber power amplifier (saturated output 27dBm)

C+L-band erbium-doped fiber power amplifier (referred to as BA amplifier), can be used to amplify optical signals in the power range of -6dBm~+3dBm or higher, with a maximum saturation output power of 27dBm, commonly used to increase the emission power of laser sources. (Erbium-doped Fiber Booster Amplifier for C-band and L-band)

Variable gain fiber amplifier C-Band 1529-1564nm

1550nm Erbium doped Fiber Amplifier EDFA

Xiaoxiao Photon Amplification Module, selectable bands: O band, S band, C band, L band. Amplifier types available: Booster Amplifier, Pre Amplifier. Low noise, optional gain of 8dB~40dB. The EDFA-C-B-40-ISO series is a C-band fiber amplifier with a wavelength of 1530-1560nm. It has a wide range of applications including high-speed data signals, image signals, and amplification of femtosecond pulses. WDM signals exhibit excellent gain stability across the entire L-band broadband. Max. Output, input/output fiber, control method, and appearance can all be customized.

L-band Erbium doped Fiber Amplifier L-band 1565-1580nm 1/2W (EDFA TDLAS Laser Remote Sensing Method)

Xiao Xiaoguang amplification module, optional bands: O band, S band, C band, L band. Amplifier types available: Booster Amplifier, Pre Amplifier. Low noise, optional gain of 8dB~40dB. The EDFA-L-B-30-ISO series is an L-band fiber amplifier with wavelengths ranging from 1565 to 1580nm. It has a wide range of applications including high-speed data signals, image signals, and amplification of femtosecond pulses. WDM signals exhibit excellent gain stability across the entire L-band broadband. The maximum output, input/output fiber, control method, and appearance can all be customized.

Pulse type EDFA erbium-doped fiber amplifier module 1528.77-1565.05nm (FC/APC interface)

The pulse EDFA module can maintain a complete waveform when amplifying the reference signal, and the product can operate in ACC/APC/AGC mode. It adopts highly achievable temperature control technology, which enables the product to have good thermal performance over a wide temperature range. It has been widely used in fields such as fiber optic sensing, wind induced lidar, hydrophone systems, etc.

C-Band small signal high gain erbium-doped fiber amplifier EDFA

Xiaoxiao Photon's C-Band small signal high gain erbium-doped fiber amplifier (single-mode/polarization maintaining) adopts a unique optical path design, combined with proprietary ultra-low noise erbium-doped fiber, which has the characteristics of low noise index and high gain, and its comprehensive performance surpasses similar products in the market. C-Band ultra-low signal high gain erbium-doped fiber amplifier (single-mode/polarization maintaining) is suitable for amplifying single frequency narrow linewidth light sources, and the linewidth can be narrowed to the kHz level. It is an ideal amplifier for weak signal acquisition applications in coherent communication, heterodyne detection, Doppler wind radar and other systems.

High power polarization maintaining EDFA erbium-doped fiber amplifier module 1528-1565nm 23dBm/200mW (FC/APC interface)

Xiaoxiao Photon's polarization maintaining EDFA module uses 980nm pump laser to provide energy and employs polarization maintaining passive devices, resulting in a high output extinction ratio. The product can operate in ACC/APC/AGC mode and adopts highly achievable temperature control technology, which enables the product to have good thermal performance over a wide temperature range. It has been widely used in fiber optic sensing and fiber optic fields.

C-band compact EDFA erbium-doped fiber amplifier module 200mW

The MP5100-FM02 series from Xiaoxiao Photon Technology Co., Ltd. is a low-noise, high-performance, and cost-effective EDFA module designed specifically for cable television systems; GM is a gain block module without electronic control circuit; FM is a full function module with electronic control circuitry. MPMP5100-FM02， It is a fully functional module that adopts a compact MSA package of 70X90X15mm, with a single channel narrow bandwidth standard version. A standard 30 pin electrical connector provides simple electrical connections. The module uses a high-performance refrigeration pump laser with a maximum optical output of 24dBM. The power is adjustable and can be used in conjunction with our online fiber optic attenuator (click the link to view)

C-band EDFA single wave continuous erbium-doped fiber amplifier 1529-1561nm 10w

Xiao Xiaoguang amplification module, optional bands: O band, S band, C band, L band. Amplifier types available: Booster Amplifier, Pre Amplifier. Low noise, optional gain of 8dB~40dB. The EDFA-B-40-ISO series is an L-band fiber amplifier with wavelengths ranging from 1565 to 1580nm. It has a wide range of applications including high-speed data signals, image signals, and amplification of femtosecond pulses. WDM signals exhibit excellent gain stability across the entire L-band broadband. The maximum output, input/output fiber, control method, and appearance can all be customized.