400-828-1550
首页 Light Sources Optical Amplifier EDFA High power polarization maintaining EDFA erbium-doped fiber amplifier module 1528-1565nm 23dBm/200mW (FC/APC interface) C-band Modular Polarization Maintaining Erbium-doped Fiber Amplifier 23dBm

    • C-band Modular Polarization Maintaining Erbium-doped Fiber Amplifier 23dBm

    Idealphotonics' polarization-maintaining EDFA module uses a 980nm pump laser to provide energy, adopts polarization-maintaining passive devices, and has a high output extinction ratio. The product can work in ACC/APC/AGC mode, and uses highly achievable temperature control technology to enable the product to have good thermal performance in a wide temperature range. It has been widely used in fiber optic sensing and fiber optic fields.

    产品特点Output power up to 40dBm、 ACC/APC/AGC operation mode、 Low noise index, low power consumption、 High stability, high reliability、 Customization

    产品货号B80030023

    应用领域Fiber optic sensing、 Polarization-maintaining optical communication system、 Universities, research institutes

    产品单价联系客服询价

    到货日期请咨询客服获得货期

    产品库存请咨询客服

    Daisy

    电话：18602170419

    邮箱：moli@microphotons.com

    加入询价单 在线咨询

    收藏

    相关产品

    主要参数
  • 核心参数

  • 尺寸图

    • Parameter

    Parameters

    Typical

    Wavelength (nm)

    1535-1565nm

    Input Power (dBm)

    -6~+10

    Standby Protection Input Power (dBm)

    ≤-10

    Saturated Output Power (dBm)

    27/30/33/35/37/40（Pin=-3dBm）

    Adjustable Output Power Range

    10%-100%

    Noise Figure (dB)

    ≤6.0（Pin=-3dBm）

    Gain Wavelength Non-uniformity (dB)

    ≤1@Different wavelength

    Polarization Dependent Gain (dB)

    ≤0.5

    Polarization Mode Dispersion (ps)

    0.5

    Input/Output Isolation (dB)

    ＞35

    Optical Power Monitoring

    Input/Output Optical Power Monitoring

    Fiber/Connector

    SMF-28e，FC/APC

    Operating Mode

    ACC/APC/AGC

    Pigtail Length (cm)

    100±2

    Dimensions (mm)

    90(L)x70(W)x25(H)

    Technical indicators:

    1. Output power is optional;

    2. Peak operating wavelength can be specified;

    3. Isolation refers to the isolation for ASE light;

    4 The output power stability test condition is 25 degrees, after 30 minutes of preheating;

    5. Max. power consumption refers to the overall power consumption under extreme working conditions.

     

     

    Ordering Information

    PMEDFA-△-PG-OPP-ISO

    △：

    C=C band

    L=L Band

    C+L=C+L Band

    PG: package method

    B：benchtop M：module

    OPP（Output Power）：output power，unit dbm。

    E.g. ：16-16dbm，23-23dbm

    ISO：

    Built-in isolator protection 0-none, 1-pump protection

     

    可选配置表
    产品资料

    暂无资料

    新品推荐

    • 精品现货
    • 非标定制
    • 质量保证
    • 产品研发
    • 顺丰速运