400-3000nm pulsed diode laser source

The wavelength range of Xiaoxiao Photon's diode laser is very wide, from 400nm to 3000nm. Pulse laser parameters such as pulse frequency, pulse duration, and duty cycle are controlled by a computer through a USB port.

1060-2000nm nanosecond pulse laser source

Xiaoxiao Photon's nanosecond laser source provides short pulse durations of approximately 5 to 1000 ns in two different frequency bands, 1 and 1.5 μ m, at a full operating repetition rate of 1 Hz to 200 kHz. Compared with existing convective pulse lasers on the market, this all fiber nanosecond laser source has a compact structure and light weight.

UKKO nanosecond fiber laser 1064nm 200uJ 10W 10-1000kHz

Nanosecond laser is a type of laser that can emit nanosecond pulse laser. The duration of laser pulses is usually in the nanosecond range (1 nanosecond=10-9 seconds), and this type of laser is widely used in fields such as material processing, medical treatment, spectroscopy, scientific research, and laser communication.

532/1064nm EVO-UC-NS nanosecond fiber laser

Nanosecond laser is a type of laser that can emit nanosecond pulse laser. The duration of laser pulses is usually in the nanosecond range (1 nanosecond=10-9 seconds), and this type of laser is widely used in fields such as material processing, medical treatment, spectroscopy, scientific research, and laser communication.

CAREX programmable pulsed high-power nanosecond ultraviolet fiber laser 343/515nm

Flexible nanosecond visible light fiber laser for high-speed precision microfabrication

Single frequency high-power nanosecond laser 1064nm 10W

PULSELAS ™- A-1064-10W-SF is a powerful diode pumped single frequency nanosecond laser system that provides 1 mJ pulse energy at a 10 kHz pulse repetition rate. It operates at a fundamental wavelength of 1064nm. Frequency conversion of wavelengths 532nm, 355nm, and 266nm is optional. The unique characteristics of this laser, such as near transform limited spectral width, high average and peak power, diffraction limited output beam, etc., make it an ideal choice for many scientific and industrial applications, including optical meteorology, interferometry, high-resolution laser spectroscopy, fiber optic communication, single pulse holography, and many other applications. Ethernet connectivity allows for easy access and control of laser systems, even in remote, hard to reach, or hazardous areas.

4 wavelength air-cooled diode pumped solid-state laser 100Hz 5mJ (266/355/532/1064nm)

ARTHOS 20 AC 4WL is an air-cooled diode pumped solid-state laser that can operate at a repetition rate of up to 100 Hz. According to different versions, the system generates 1064nm, 532nm, 355nm, Short laser pulse light radiation at 266nm. The laser head consists of an optical unit and an electrical unit. Including all components required for laser operation and communication.

Water cooled diode pumped nanosecond solid-state laser 1064nm (100mJ 1kHz 10ns)

ARTHOS 100FM is a diode pumped solid-state laser characterized by high energy, high repetition rate, and good beam quality. Another highlight is the modulator, which is used for single attenuation between pulses from 0 to 100%. We plan to carry out further development projects to achieve higher energy and repetition rates. The second, third, and fourth harmonics of Nd: YAG can also be provided upon request.

TARBO high repeatability diode pumped nanosecond solid-state laser 532nm 300kHz 20ns

TARBO is a highly repetitive diode pumped solid-state laser with an operating frequency of up to 300kHz. According to this version, the system generates optical radiation in short laser pulses of 532nm, with an average power of 40W or 70W. A laser consists of an optical device and an electronic device, including all necessary components for laser operation and communication.

MNL1342 diode pumped sub nanosecond passive Q-switched laser 336/447/671/1342nm 100Hz 100kW pulse width 0.5ns

The MNL1342 series DPSS passive Q-switched sub nanosecond laser provides high peak power of>100 kW at a repetition rate of 100Hz. The short laser cavity is fixed on a thermally stable and controlled substrate, providing extremely stable output parameter performance. Small footprint integrated into OEM lasers. Yanas pulse duration

YUCCA UV Fiber Pulse Laser 343/515nm

YUCCA， Ultraviolet fiber laser provides high pulse repetition rate and high power with short nanosecond pulses. It is fully designed to improve laser processing quality through shorter pulse widths and increase productivity through higher pulse repetition rates. Its innovative fiber design enables different combinations of short nanosecond pulses, with high-speed processing performance and reduced overall processing costs. YUCCA has a constant short nanosecond pulse duration and beam quality across the entire pulse repetition rate range, making it a suitable laser source for the next generation of ultraviolet laser microfabrication equipment with the goal of higher throughput. YUCCA adopts high-end design methods that exceed industry quality standards to ensure reliability and availability. YUCCA's use of field validated technology, qualified components, good practices, and high-quality manufacturing is the correct answer to operating 24/7 in environments that extend production cycles.

Green/UV/DUV high-frequency portable nanosecond pulse laser 532/355/266nm

Green/UV/DUV portable nanosecond pulse laser is a high repetition rate short pulse laser used for sensing applications. It combines a frequency converter with a 1064nm nanosecond pulse fiber laser to achieve 532nm (green)/355nm (ultraviolet)/266nm (deep ultraviolet) laser. The nonlinear optical crystals of OXIDE have high quality and high functionality, and are integrated into frequency converters. High repetition rate (50kHz) and high peak power are suitable for sensing applications such as LiDAR. In addition, the optimized optical design without resonators achieves a simple, highly reliable, and lightweight laser unit.

532nm sub nanosecond microchip laser HLX-G

HLX-G products are based on solid-state, diode pumped, and passive Q-switched lasers. Our laser generates a single pulse of 532 nm with a duration as short as 500 ps, a repetition rate of up to 100 kHz, an average power of up to 200 mW, and an energy of up to 20 μ J.

1064nm sub nanosecond microchip pulse laser HLX-I

HLX-I products are based on solid-state, diode pumped, and passive Q-switched lasers. Our laser generates a single pulse of 1064 nm with a duration as short as 450 ps, a repetition rate of up to 100 kHz, an average power of up to 500 mW, and an energy of up to 50 μ J.

Short pulse diode module LDM (wavelength 405-1550nm optional)

This short pulse diode module LDM is suitable for 405-1550n wavelength laser diodes, with laser pulses as short as 30 ps, nanosecond pulse width 1-100ns, peak power up to 2W, repetition rate up to 30 MHz, and high repetition rate up to 60 MHz using an external TTL signal source. Can be controlled by computer through mini USB interface

1550nm nanosecond high-power pulse light source

The high-power nanosecond pulse fiber laser uses a high-power gain fiber module, combined with dedicated driving and temperature control circuits, to output high peak and high-energy laser pulses. The laser wavelength and power are stable, and the modular design facilitates system integration. It can be used in laser radar, distributed fiber optic sensing systems, etc.

Small pulsed fiber laser 1535/1550nm

Miniature pulsed fiber laser 1535nm

1550nm desktop high integration polarization maintaining pulse light source (1.2 μ J)

1550nm highly integrated polarization maintaining pulse light source (modular) 1.2 μ J

1625nm high-power pulsed laser diode module

The SCW 1632-350R and SCW 1631F-350R laser diode modules are high-power 1625 nm RWG F/P laser diodes, packaged in a 14 pin butterfly and DIL configuration. The laser diode is optically coupled with the SMF fiber tail, and includes a thermoelectric cooler and an electrically isolated temperature sensing thermistor. The SCW 1632-350R and SCW 1631-F-35R laser diode modules are specifically designed for optical testing equipment applications that require high peak pulsed light power and comply with RoHS standards.

1550nm high peak power pulsed fiber laser 1W (DTS, LiDAR)

The high peak power pulse light source for eye safety developed by Xiaoxiao Photon. The product has high electro-optical conversion efficiency, small nonlinear effects and ASE, and a wide operating temperature range. It is suitable as an emission light source for solid-state laser Lidar.

25W 1550nm high peak power pulse laser with a spectral width of 15nm (for laser rangefinder)

Xiaoxiao Photon's pulsed semiconductor laser is a high brightness CVLL 1550nm pulsed laser diode with a power output of up to 75 watts. CVLL devices are highly suitable for most distance measurement applications that require "eye safe" operation.

1030/1064nm Ultra Short Nanosecond Pulse Seed OEM Laser Source 300mW

Ultra short nano pulse seed laser driver is an ideal choice for driving 14 pin butterfly packaged laser modules, suitable for applications with pulse widths less than 1ns. Applications include material processing, time-resolved spectroscopy, LIDAR, etc. The driving circuit is provided by a single 5V power supply. All other required voltages are generated on the circuit board through efficient power conversion. The driver provides a bidirectional proportional integral derivative controller (PID) thermoelectric cooler controller (TEC) with a current of 3A and a voltage of 4.2V. The DFB laser diode equipped with LD-PD inc 1020-1083nm can achieve ultrafast output with a pulse width of 1-10 ns and a peak power of 300mw.

905nm High Peak Power Pulse Laser 35/75W (High Voltage Testing Field)

The SPL-PL90-3 ST pulsed semiconductor laser module of AOS Fiber is a 905nm InGaAs/GaAs strain quantum well laser tube that can be driven separately in the 45A version. The laser has a current injection width of 200 microns and a chip height of 10-480 microns. We now offer 9mm packaging, 5mm packaging, and 18F fiber coupling packaging for laser diode packaging design and assembly processing technology. The rise and fall time of quantum well laser design is less than 1ns, but the driving circuit layout and packaging inductance play a dominant role and should be designed accordingly.

905nm 600W high peak power pulse laser with 8nm spectral width TO56 (for laser rangefinder)

The pulse semiconductor laser module of LD-PD is a 905nm InGaAs/GaAs strain quantum well laser tube that can be driven separately in the 45A version. The laser has a current injection width of 200 microns and a chip height of 10-480 microns. We now offer 9mm packaging, 5mm packaging, and 18F fiber coupling packaging for laser diode packaging design and assembly processing technology. The rise and fall time of quantum well laser design is less than 1ns, but the driving circuit layout and packaging inductance play a dominant role and should be designed accordingly.

1550nm nanosecond pulse fiber laser (for DTS) 50W

Xiaoxiao Photon's 1550nm pulse laser is an efficient ns pulse fiber light source in the safe wavelength range for human eyes. The new ns level pulse driving circuit has stable pulses and low distortion. The optimized low-noise erbium-doped fiber amplifier achieves high peak power and ns level pulse output. This laser is highly suitable for fields such as distributed fiber temperature measurement systems (DTS), laser ranging, and fiber optic sensing.