InGaAs unit detector PD-600M-A

The high-speed low-noise photodetector module integrates an ultra-low-noise analog PIN detector, a low-noise broadband transimpedance amplifier, and an ultra-low-noise power supply. It has the characteristics of high gain, high sensitivity, high bandwidth, low noise, and high common-mode rejection ratio, which can effectively reduce the common-mode noise of the signal and improve the signal-to-noise ratio of the system.

InGaAs unit detector PD-5G-A

The high-speed low-noise photodetector module integrates an ultra-low-noise analog PIN detector, a low-noise broadband transimpedance amplifier, and an ultra-low-noise power supply. It has the characteristics of high gain, high sensitivity, high bandwidth, low noise, and high common-mode rejection ratio, which can effectively reduce the common-mode noise of the signal and improve the signal-to-noise ratio of the system.

InGaAs unit detector PD-500M-A

The high-speed low-noise photodetector module integrates an ultra-low-noise analog PIN detector, a low-noise broadband transimpedance amplifier, and an ultra-low-noise power supply. It has the characteristics of high gain, high sensitivity, high bandwidth, low noise, and high common-mode rejection ratio, which can effectively reduce the common-mode noise of the signal and improve the signal-to-noise ratio of the system.

InGaAs unit detector PD-2G-A

The high-speed low-noise photodetector module integrates an ultra-low-noise analog PIN detector, a low-noise broadband transimpedance amplifier, and an ultra-low-noise power supply. It has the characteristics of high gain, high sensitivity, high bandwidth, low noise, and high common-mode rejection ratio, which can effectively reduce the common-mode noise of the signal and improve the signal-to-noise ratio of the system.

InGaAs unit detector PD-2.5G-A

The high-speed low-noise photodetector module integrates an ultra-low-noise analog PIN detector, a low-noise broadband transimpedance amplifier, and an ultra-low-noise power supply. It has the characteristics of high gain, high sensitivity, high bandwidth, low noise, and high common-mode rejection ratio, which can effectively reduce the common-mode noise of the signal and improve the signal-to-noise ratio of the system.

InGaAs unit detector PD-1G-A

The high-speed low-noise photodetector module integrates an ultra-low-noise analog PIN detector, a low-noise broadband transimpedance amplifier, and an ultra-low-noise power supply. It has the characteristics of high gain, high sensitivity, high bandwidth, low noise, and high common-mode rejection ratio, which can effectively reduce the common-mode noise of the signal and improve the signal-to-noise ratio of the system.

InGaAs unit detector PD-1.2G-A

The high-speed low-noise photodetector module integrates an ultra-low-noise analog PIN detector, a low-noise broadband transimpedance amplifier, and an ultra-low-noise power supply. It has the characteristics of high gain, high sensitivity, high bandwidth, low noise, and high common-mode rejection ratio, which can effectively reduce the common-mode noise of the signal and improve the signal-to-noise ratio of the system.

2W 1550nm single-mode single-stage fiber optic isolator, isolation 29dB

Idealphotonics' optical isolator products maintain excellent return loss isolation performance under any polarization state. They feature low loss, high isolation, high return loss, low polarization-dependent loss, low polarization mode dispersion, wide operating wavelength range, and operating temperature range. Additionally, they have a glue-free optical path. These features make the product a cost-effective solution for communication networks. This series of products can be used in doped fiber amplifiers, wavelength division multiplexing systems, fiber optic devices, and lasers.

Fabry-Perot (F-P) etalon (100GHz finesse: 10) WLFE-2-1550-100-10-SM-0.9/1.0-FC/APC

Idealphotonics' Fabry-Perot etalons are based on free-space Fabry-Perot etalons. They provide periodic wavelength comb transmission. They include 2-port transmission type, 3-port transmission/reflection type and 4-port transmission type. The 2-port type provides a transmission spectrum, the 3-port type provides transmission and reflection spectra, and the 4-port type provides a phase delay (when the same signal is input into the two input ports, there is a phase delay at the two output ports). Our company's Fabry-Perot etalon wavelength can cover the C-band, including single mode and polarization-maintaining fiber. The free-space range (FSR) and finesse (F) of the etalon can be customized according to customer requirements. Widely used in optical communications, fiber grating sensors, and tunable fiber laser.

Fabry-Perot (F-P) etalon (25GHz finesse: 7.5)

Our Fabry-Perot etalons are free-space based Fabry-Perot etalons. They provide periodic wavelength comb transmission. They include 2-port transmission type, 3-port transmission/reflection type and 4-port transmission type. The 2-port type provides transmission spectrum, the 3-port type provides transmission and reflection spectrum, and the 4-port type provides a phase delay (when the same signal is input into the two input ports, there is a phase delay at the two output ports). Our company's Fabry-Perot etalons can cover the C-band wavelength, including single-mode and polarization-maintaining fibers. The free-space range (FSR) and finesse (F) of the etalons can be customized according to customer requirements. They are widely used in optical communications, fiber Bragg grating sensors, and tunable fiber lasers.

Fabry-Perot (F-P) etalon (100GHz finesse: 40) WLFE-2-1550-100-40-SM-0.9/1.0-FC/APC

Idealphotonics' Fabry-Perot etalons are based on free-space Fabry-Perot etalons. They provide periodic wavelength comb transmission. They include 2-port transmission type, 3-port transmission/reflection type and 4-port transmission type. The 2-port type provides a transmission spectrum, the 3-port type provides transmission and reflection spectra, and the 4-port type provides a phase delay (when the same signal is input into the two input ports, there is a phase delay at the two output ports). Our company's Fabry-Perot etalon wavelength can cover the C-band, including single mode and polarization-maintaining fiber. The free-space range (FSR) and finesse (F) of the etalon can be customized according to customer requirements. Widely used in optical communications, fiber grating sensors, and tunable fiber laser.

Multimode MEMS Variable Attenuator 1310nm

Multimode/single mode variable attenuator Based on Idealphotonics' unique optical design and processing capabilities, our VOA has the characteristics of being able to quickly adjust optical attenuation, small size, low insertion loss, low polarization-related loss, high mode-related stability and high reliability. It is mainly used in multimode transmission networks, power balancing, product testing, and related instruments and equipment. Insertion loss ≤1.0 dB Fiber connector FC/APC connector