1550nm Single-Mode Dual-Stage Fiber Isolator FC/APC

IdealPhotonics‘ optical isolator products maintain excellent back-reflection isolation performance under any polarization state. They feature low insertion loss, high isolation, high return loss, low polarization-dependent loss (PDL), low polarization mode dispersion (PMD), a wide operating wavelength and temperature range, and an epoxy-free optical path. These characteristics make them a cost-effective solution for communication networks. This series of products is suitable for erbium-doped amplifiers, wavelength division multiplexing (WDM) systems, fiber optic equipment, and lasers.

1550nm Single-Mode Single-Stage Fiber Isolator (FC/APC)

IdealPhotonics‘ optical isolator products maintain excellent back-reflection isolation performance under any polarization state. They feature low insertion loss, high isolation, high return loss, low polarization-dependent loss (PDL), low polarization mode dispersion (PMD), a wide operating wavelength and temperature range, and an epoxy-free optical path. These characteristics make them a cost-effective solution for communication networks. This series of products is suitable for erbium-doped amplifiers, wavelength division multiplexing (WDM) systems, fiber optic equipment, and lasers.

518nm Fiber Optic Variable Attenuator

Our optical fiber variable attenuator has the characteristics of fast adjustment of optical attenuation, small size, low insertion loss, low polarization-related loss, high mode-related stability and high reliability. It is mainly used in transmission networks, power balancing, product testing, related instruments and equipment, etc.

1550nm narrow linewidth frequency stabilized laser module 2kHz-5kHz polarization maintaining

Idealphotonics’ narrow linewidth semiconductor laser module has the characteristics of ultra-low RIN noise and ultra-narrow linewidth, and is currently widely used in automotive lidar and fiber optic sensor detection systems.

1550nm Single-mode Single Stage Fiber Isolator (Bare fiber, no connector)

Idealphotonics’ fiber isolator products can maintain excellent return optical isolation performance under any polarization state. It has low loss, high isolation, high return loss, low polarization-dependent loss, low polarization mode dispersion, wide operating band and operating temperature range, and no glue in the optical path. These properties provide the possibility for low-cost solutions for communication networks. This series of products can be used in erbium-doped amplifiers, wavelength division multiplexing systems, fiber optic equipment and lasers.

1550nm narrow linewidth single-frequency laser module ＜20kHz polarization maintaining

Idealphotonics’ narrow linewidth semiconductor laser module has the characteristics of ultra-low RIN noise and ultra-narrow linewidth, and is currently widely used in automotive lidar and fiber optic sensor detection systems.

488nm Fiber Optic Variable Attenuator

Our optical fiber variable attenuator has the characteristics of fast adjustment of optical attenuation, small size, low insertion loss, low polarization-related loss, high mode-related stability and high reliability. It is mainly used in transmission networks, power balancing, product testing, related instruments and equipment, etc.

1550nm Benchtop highly integrated polarization-maintaining pulse light source (1.2uJ)

Idealphotonics' 1550nm pulsed polarization-maintaining light source is a pulsed fiber laser designed for short-range coherent Doppler wind laser radar applications. The unique technically approved single-frequency narrow linewidth seed source has a linewidth of less than 3KHz. Together with the acousto-optic modulator, the 1550nm pulse light source produces a high turn-off ratio pulse signal of >100dB, an output polarization extinction ratio of >18dB, and a single pulse energy of 1.2μJ, making it an ideal light source for sensing applications such as laser radar.

488nm single mode fiber optic patch cord

Fiber optic patch cords (also known as fiber optic connectors) are optical cables with connector plugs installed on both ends to achieve active connection of the optical path. Both ends of Idealphotonics' fiber optic patch cords are high-quality, narrow-pin ceramic FC/AFC connectors. Produced by our equipment, each patch cord is individually tested at the test wavelength listed in the specification label to ensure the extinction ratio and low back reflection (return loss) when connecting fibers. These patch cords are in stock and have high-quality polishing to ensure a typical return loss of more than 60 dB.

980nm In-line Polarizer PM980 Fiber

Idealphotonics' in-line polarizer is designed to pass a specified polarized light and block other polarized light. Its function is to convert unpolarized light into linearly polarized light to achieve a high extinction rate. It is also used to improve the extinction rate of instruments such as precision measurement systems, fiber optic sensors, and high-speed test instruments. We have specially designed in-line polarizers for ring gyroscope systems, and its components have been tested under full temperature conditions. In addition, the mini size is very suitable for our cost-effective fiber optic gyroscope system.

1650nm Polarization Maintaining AOM 200MHz

Idealphotonics' acousto-optic modulators are widely used in the field of fiber optic sensing due to their high modulation extinction ratio and high power handling. This product is specially developed for the application needs of fiber optic sensing. It has the advantages of small size, low power consumption (<1W), fast rise time (12ns), good modulation pulse shape (small overshoot), good pulse repeatability (small repetition period jitter), etc. In addition, the modulator and driver can be packaged in an integrated manner, which is convenient for system integration. It can be widely used in various fiber optic sensing systems that require pulse modulation, such as φ-OTDR, BOTDR, OFDR, etc.

980nm In-line Polarizer Hi1060 Fiber

Idealphotonics' in-line polarizer is designed to pass a specified polarized light and block other polarized light. Its function is to convert unpolarized light into linearly polarized light to achieve a high extinction rate. It is also used to improve the extinction rate of instruments such as precision measurement systems, fiber optic sensors, and high-speed test instruments. We have specially designed in-line polarizers for ring gyroscope systems, and its components have been tested under full temperature conditions. In addition, the mini size is very suitable for our cost-effective fiber optic gyroscope system.