• Fast Wavelength Meter 1250-1650nm (182-240THz)

    With the growing demand for communication data, a larger capacity optical communication transmission system is needed, which has driven optical component and network equipment manufacturers to use coherent communication modules based on wavelength tunable lasers in transmission backbone networks. At present, the scope of use of wavelength tunable lasers and coherent modules will further sink to the metropolitan area network and even access network. A very important test for tunable lasers is accurate measurement and wavelength calibration. With the continuous increase in communication channels, from the initial 40 waves to the current highest 800 waves, fast and accurate wavelength testing is more critical than ever. Our fast wavelength meter is designed and developed to meet this new test demand. The product is based on Fizeau interferometer technology, combining temperature-controlled interferometers, multi-stage compound interferometer cavities and linear array CCD detectors. Unlike traditional ordinary wavelength meters based on Michelson interferometers, this product adopts a fully solid-state structure and non-mechanical moving parts optical design, which enables it to ensure very high measurement accuracy (1pm) while having an ultra-high-speed measurement rate (up to 1kHz wavelength refresh rate). Combined with external triggering and fast power detection functions, this product becomes the best choice for accurately observing synchronous transient changes in wavelength and power.

    产品特点High wavelength accuracy: ±0.33ppm (typical value: ±0.5pm), can be used for wavelength calibration and measurement、 All-solid-state structure, optical design with no mechanical moving parts. Fast test speed: 1kHz refresh rate, suitable for transient wavelength and power testing, greatly reducing the test time of iTLA, DBR and coherent communication modules、 Support external triggering, and can be used with SMU precision source meter for synchronous testing、 Suitable for iTLA and tunable laser fast wavelength testing、 Support broadband mode, can test 25Gbps modulated optical signals、 Supports drift test and Max. Min. Value Display、 0.1pm/12.5MHz wavelength resolution.

    产品货号D80010011

    应用领域

    产品单价联系客服询价

    到货日期请咨询客服获得货期

    产品库存请咨询客服

    Sherry

    电话:16628709332

    邮箱:moli@microphotons.com

    相关产品

    主要参数
  • 核心参数
  • 尺寸图
  • General parameters

    Software Features

    The product's interface GUI is very intuitive and concise, allowing easy configuration of the system and display of all information, while supporting wavelength and power testing.

     2023061914_591326099361.png

     

    Wavelength index

    Wavelength range

    1250~1650 nm (182~240THz)

    Wavelength accuracy

    ±0.33 ppm (±0.5pm@1550 nm)

    Wavelength repeatability

    ±0.07 ppm (±0.1pm@1550 nm)

    Wavelength stability

    <±0.3pm@24 hours

    Wavelength resolution

    0.1pm

    unit

    nm, cm-1, THz

     

    Power Index

    Calibration accuracy

    ±0.5 dB (±30 nm from 1310 and 1550 nm)

    Linearity

    ±0.5 dB (1250–1650 nm)

    Polarization dependence

    ±0.5 dB (1250–1650 nm)

    Display resolution

    0.01 dB

    Measuring speed index

    unit

    dBm, mW

    Single Sampling

    Single sampling~200 Hz

    Speed@ External Trigger

    1~1000 Hz

    Speed @ Internal Trigger

    1~1000 Hz

    Trigger indicator

    Trigger logic level

    TTL

    External trigger

    Support wavelength and power synchronous trigger (1~1000 Hz)

    Internal trigger

    Support internal trigger frequency setting (1~1000 Hz)

    Optical signal input index

    Max. Bandwidth

    25 GHz (200 pm @1550 nm)

    Input optical signal power range

    -30 dBm~+10 dBm (8 µW~10 mW)

    Optical Interface

    9/125 µm single-mode fiber (FC/PC)

    Optical interface return loss

    >35 dB

    Multi-peak detection index

    Minimum frequency difference between main peak and secondary peak in multi-peak detection

    2300 MHz

    Multi-peak detection main peak/secondary peak maximum power difference

    17 dB

    General indicators

    Built-in temperature control

    Optical unit uses precision TEC to control temperature

    Remote Control

    API supports remote control and high-speed sampling working mode

    environment

    Use in indoor facilities

    Work

    15 ° C to + 28 ° C, 30 % to 80 % relative humidity without condensation

    store

    -10 ° C to 70 ° C, 10 % to 90 % relative humidity non-condensing

    Working air pressure

    500-900 mm Hg

    power supply

    Voltage range: 100-240 VAC, frequency range: 50/60 Hz, Max. Power: 250 W, Fuse Specification T3.15AL 250 V AC

    Dimensions (mm)

    408*441*157 (with foot pad)

    weight

    Net weight 12.0 kg

    Communication interface

    Communication interface: LAN, USB, RS232; External trigger interface: BN C

    (Internal/external trigger, high-speed acquisition mode) supports SCPI protocol

     


    Procurement Information

    FWM1216- 1KHz

    Fast Wavelength Meter

    Standard accessories

    Power cord, USB cable, measurement software and drivers.

     


    可选配置表
    产品资料

    新品推荐

    • 精品现货
    • 非标定制
    • 质量保证
    • 产品研发
    • 顺丰速运