InGaAs Unit Detector PD-800M-A

首页 PhotoDetectors Amplified detectors InGaAs Amplified Photodetector Indium gallium arsenide InGaAs unit detector PD series 800~1700nm InGaAs Unit Detector PD-800M-A

InGaAs Unit Detector PD-800M-A

The high-speed low-noise photoelectric unit detection module integrates a low-noise analog PIN detector, a low-noise broadband transimpedance amplifier and an ultra-low noise isolation power supply. The output signal is not affected by the external power supply and has the characteristics of high gain, high sensitivity, high bandwidth and low noise.

产品特点Low noise、 High gain、 High bandwidth、 Compact structure、 Built-in low noise isolated power supply

产品货号E80040225

应用领域Distributed fiber optic sensing、 Laser wind radar、 Optical coherence tomography、 Spectral measurement、 Ns-level optical pulse detection、 Fiber optic communication、 Other scientific research applications

产品单价联系客服询价

到货日期请咨询客服获得货期

产品库存请咨询客服

Sherry

电话：16628709332

邮箱：moli@microphotons.com

加入询价单在线咨询

相关产品

主要参数
可选配置表
资料下载

主要参数

核心参数

尺寸图

Parameters

PN#	PD-100M -A	PD-200M -A	PD-300M -A	PD-400M -A	PD-500M -A	PD-600M -A	PD-800M -A	PD-1G -A	PD-1.2G -A	PD-1.5G -A	PD-2G -A	PD-2.5G -A	PD-5G -A	Unit
Detector type	InGaAs
Wavelength	800~1700													nm
Bandwidth	100M	200M	300M	400M	500M	600M	800M	1G	1.2G	1.5G	2G	2.5G	5G	Hz
Detector responsivity	0.95	0.95	0.95	0.95	0.95	0.95	0.95	0.95	0.95	0.95	0.95	0.95	0.95	A/W@1550nm
Transimpedance gain	30K	30K	30K	10K	5K	5K	30K	30K	30K	20K	15K	15K	3K	V/A
Saturated optical power	140	140	140	420	840	840	140	140	140	210	280	280	1400	μW
NEP	5	5	5	7	7	8	9	9	9	9	9	9	9	pW/Sqrt(Hz)
Output impedance	50	50	50	50	50	50	50	50	50	50	50	50	50	Ω
Output coupling mode	DC/AC	DC/AC	DC/AC	DC/AC	DC/AC	DC	AC	AC	AC	AC	AC	AC	AC
Supply voltage	5	5	5	5	5	5	12	12	12	12	12	12	12	V
Supply current	0.3(max)	0.3(max)	0.3(max)	0.3(max)	0.3(max)	0.3(max)	0.2(max)	0.2(max)	0.2(max)	0.2(max)	0.2(max)	0.2(max)	0.2(max)	A
Optical input	FC/APC（Free space light optional）
RF output	SMA
Dimensions	655020												755525	mm

Instructions for use

1. The module has a power supply voltage of 5V and a maximum power supply current of 0.25A.

2. Input is an optical input interface; RF is a radio frequency output interface.

3. Before connecting to the input terminal, please ensure that the end surface is clean to prevent dirt from affecting the measurement results.

可选配置表

产品资料

暂无资料

新品推荐

Tilted Fiber Bragg Grating

Tilted fiber Bragg grating is an advanced passive fiber...

查看详情
7-Core Fiber Fan-In/Fan-Out Device

Multi-core fiber fan-in/fan-out devices are key compone...

查看详情
Three-Mode MDM Device

Our series of mode multiplexers/demultiplexers and mode...

查看详情
MEMS Optical Switch Module

The matrix optical switch is a high-performance, modula...

查看详情