IdealPhotonics' Ultra-Width series 2000nm ASE light source is an Amplified Spontaneous Emission (ASE) light source operating around 1900 nm, offering one-touch operation and single-mode fiber output for testing and measurement applications. It is based on thulium-doped fluoride fiber to maximize ASE, with a typical maximum optical output power of 10 mW. An integrated isolator minimizes back reflections into the light source to enhance output power stability. The nominal center wavelength of the emitted light is 1920 nm and is non-polarized. The spectral width measured 20 dB below the peak is 100 nm. This light source features a Turn-Key pump laser protection function to effectively prevent user errors. It supports coarse power adjustment (1mW steps) and fine power adjustment (0.1mW steps).2000nm single-mode pump source is a highly integrated desktop system light source with a high-definition LCD display, continuously adjustable output power, and synchronous current and voltage display, making it ideal for experimental scientific research and production testing. Additionally, the company can provide modular packaging based on user needs for easy system integration.
产品特点Single-mode high-power output: up to 10mW、 Spectral width up to 120nm、 ASE optical isolation protection design、 Stable and continuously adjustable output power、 LCD status display、 High-precision ACC and ATC control circuits、 Optional built-in isolator
产品货号B80010002
应用领域Test and measurement、 Spectroscopy、 Gas sensing、 Biomedical applications、 Other scientific research
产品单价联系客服询价
到货日期请咨询客服获得货期
产品库存请咨询客服
Daisy
电话:18602170419
邮箱:moli@microphotons.com
相关产品
Driver Parameters
Parameters | Unit | Specs | ||
Min. | Typ. | Max. | ||
PN# | LP-ASE-2000-B LP-ASE-2000-M* | |||
Output Power | mW | 10 | - | 35 |
Peak Operating Wavelength | nm | 1920 | 2000 | 2100 |
Spectral Width (FWHM) | nm | 10 | 15 | 20 |
Output Side Mode Suppression Ratio (SMSR) | dB | 20 | - | - |
Output Isolation | dB | - | 30 | - |
Output Power Stability (15 minutes) | % | - | ±0. 5 | ±0. 1 |
Output Power Stability (8 hours) | % | - | ±1.0 | ±2.0 |
Output Power Adjustable Range | % | 0 | - | 100 |
Output Power Adjustment Mode | Coarse/Fine Adjustment | |||
TEC Stability | ℃ | - | ±0.1 | ±0.2 |
TEC Operating Range | ℃ | 25 | 30 | 35 |
Operating Voltage | VAC | 100 | 220 | 240 |
Electrical Power Consumption | W | - | - | 30 |
Operating Temperature | ℃ | 0 | - | 50 |
Storage Temperature | ℃ | -40 | - | 85 |
Output Fiber Type | SMF1950 | |||
Output Fiber Length | m | > 1 | ||
Output Fiber Connector | FC/APC, other models optional | |||
Dimensions | mm | 340(L) × 240(W) × 100(H) Benchtop | ||
150(L) × 125(W) × 25(H) Module |
Technical Specification Notes:
*Software remote control optional
1.Output power selectable;
2.Peak operating wavelength customizable;
3.Isolation refers to the isolation against ASE light;
4.Output power stability test conditions: 25°C, tested after a 30-minute warm-up;
5.Maximum power consumption refers to the overall power consumption under extreme operating conditions.
Test Spectrum Graph
Test Conditions: Test temperature: 25°C; Test current: 280mA
Beam Quality
Power Test Table (@280mA) & Power Stability
Ordering Information:
LP-FP-2000-PG-OPP-BWD-FT
PG: Packaging Type
B: Benchtop
M: Module
OPP (Output Power): Output power in mW. For example: 10-10mW, 25-25mW, 50:50mW
BWD: 30:30nm, 50:50nm, 100:100nm
FT: Fiber Type
SM=SMF1950
PM=PM1950
新品推荐