980/1064nm Single-mode Fiber Conical Wavelength Division Multiplexer FC/PC

Idealphotonics' optical communication tapered wavelength division multiplexing products feature low loss, low polarization-dependent loss, wide operating bandwidth, and temperature range, with glue-free optical paths. These products are ideal for use in wavelength division multiplexing systems, fiber optic sensing systems, and optical fiber detection equipment.

915nm 1m long distance fiber collimator single mode

Idealphotonics' fiber collimators are pre-aligned and used to collimate the light emitted from FC/APC-connected fibers with diffraction-limited performance. These fiber collimators have no moving parts and are compact, making them easy to integrate into existing devices. Currently supported operating bands include 532/633/780/850/915/1064/1310/1550nm.

Ge Germanium Large photosensitive PIN photodiode (800-1800nm diameter 5mm)

Idealphotonics' stocks PIN junction diodes (PDs) with various active areas and packages, including indium gallium arsenide (InGaAs), gallium phosphide (GaP), silicon (Si), and germanium (Ge) photodiodes. We have high-speed silicon photodiodes. There are also high responsivities in the range of 900 to 2600 nm, with detection wavelengths exceeding the 1800 nm of typical indium gallium arsenide photodiodes. Dual-band photodiodes, which integrate two photodetectors close together (silicon substrate on top, indium gallium arsenide substrate on the bottom), with a combined wavelength range from 400 to 1700 nm. In order to enrich our photodiode product line, we provide mounted photodiodes for customers to power and use. The non-uniformity of the edge of the detector's active area may cause unwanted capacitance and resistance effects, thereby distorting the time domain response of the photodiode. Therefore, we recommend that the light be incident on the center of the active area. To this end, a focusing lens or pinhole can be placed in front of the detector.

Ge Germanium Ultra-large photosensitive PIN photodiode (800-1800nm diameter 10mm)

Idealphotonics' stocks PIN junction diodes (PDs) with various active areas and packages, including indium gallium arsenide (InGaAs), gallium phosphide (GaP), silicon (Si) and germanium (Ge) photodiodes. We have high-speed silicon photodiodes. There are also high responsivities in the range of 900 to 2600 nm, and the detection wavelength exceeds the 1800 nm of typical indium gallium arsenide photodiodes. Dual-band photodiodes, which integrate two photodetectors close together (silicon substrate on top, indium gallium arsenide substrate on the bottom), have a combined wavelength range from 400 to 1700 nm. In order to enrich our photodiode product line, we provide mounted photodiodes for customers to power and use. The non-uniformity of the edge of the detector's active area may cause unwanted capacitance and resistance effects, thereby distorting the time domain response of the photodiode. Therefore, we recommend that the light be incident on the center of the active area. To this end, a focusing lens or pinhole can be placed in front of the detector.

780nm single mode fiber optic connector/patch cord

Fiber optic patch cords (also known as fiber optic connectors) are optical cables with connector plugs installed on both ends to achieve active connection of the optical path. Idealphotonics fiber optic patch cords have high-quality, narrow-pin ceramic FC/AFC connectors on both ends. Produced by our equipment, each patch cord is individually tested at the test wavelength listed in the specification label to ensure the extinction ratio and low back reflection (return loss) when connecting fibers. These patch cords are in stock and have high-quality polishing to ensure a typical return loss of more than 60 dB.

L-band single mode Erbium Doped Fiber Amplifier 2W

Idealphotonics’ optical amplifier module, optional bands: O-band, S-band, C-band, L-band. Optional amplifier types: Booster Amplifier, Pre-Amplifier. Low noise, gain 8dB~40dB optional. EDFA- L-B-30-ISO series is a L-band fiber amplifier with a wavelength of 1565~1580nm. It has a wide range of applications including high-speed data signals, image signals, and femtosecond pulse amplification applications. For WDM signals, it has excellent gain smoothness throughout the L-band broadband. Max. output, input/output fiber, control method and appearance can be customized

L-band single mode Erbium Doped Fiber Amplifier 1W

Idealphotonics’ optical amplifier module, optional bands: O-band, S-band, C-band, L-band. Optional amplifier types: Booster Amplifier, Pre-Amplifier. Low noise, gain 8dB~40dB optional. EDFA- L-B-30-ISO series is a L-band fiber amplifier with a wavelength of 1565~1580nm. It has a wide range of applications including high-speed data signals, image signals, and femtosecond pulse amplification applications. For WDM signals, it has excellent gain smoothness throughout the L-band broadband. Max. output, input/output fiber, control method and appearance can be customized.

793/2000nm Single-Mode Taper Wavelength Division Multiplexer FC/PC

Idealphotonics' tapered wavelength division multiplexing products for optical communications have the advantages of low loss, low polarization-dependent loss, wide operating band and operating temperature range, and no glue in the optical path. This series of products can be used in wavelength division multiplexing systems, fiber optic sensing systems, and fiber optic optical detection equipment.

900-2700nm Large photosensitive surface InGaAs Indium Gallium Arsenide Photodiode φ2mm

The PL3000 series is a full-color PIN photodiode with a cutoff wavelength of up to 2700nm. It uses InGaAs material, a ternary compound semiconductor InGaAs material used to make various optoelectronic devices, and the material itself has stable performance. This series is designed for environmental gas detection applications, measuring CO or CO2, it provides excellent parallel resistance and response in a wide spectrum range, in addition, we can read the pin change to TO-46, TO-18, TO-5 optional.

793/2000nm Single-Mode Taper Wavelength Division Multiplexer FC/APC

Idealphotonics' tapered wavelength division multiplexing products for optical communications have the advantages of low loss, low polarization-dependent loss, wide operating band and operating temperature range, and no glue in the optical path. This series of products can be used in wavelength division multiplexing systems, fiber optic sensing systems, and fiber optic optical detection equipment.

850nm FC/PC Multimode Attenuator(MEMS-VOA-W850-1-9-S5P)

Multimode variable attenuator is based on Idealphotonics' unique optical design and processing capabilities. Our VOA has the characteristics of fast adjustment of optical attenuation, small size, low insertion loss, low polarization-related loss, high mode-related stability and high reliability. It is mainly used in multimode transmission networks, power balancing, product testing, related instruments and equipment, etc.

850nm 1m long distance fiber collimator single mode

Idealphotonics' fiber collimators are pre-aligned and used to collimate the light emitted from FC/APC-connected fibers with diffraction-limited performance. These fiber collimators have no moving parts and are compact, making them easy to integrate into existing devices. Currently supported operating bands include 532/633/780/850/915/1064/1310/1550nm.